Recently Viewed
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set
$180 / 7 days

Construction

Milled Aluminum Chassis and Regulation-Compliant PCB

Video Inputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle

Video Outputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through

Color Sampling

SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit

Latency

<0.001 Seconds (TX to RX without Format Conversion)

Supported Resolutions

1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50

Video Processing

Compression
Visually Lossless

Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color)

Audio Compression

48 kHz, 24-bit PCM

Audio Input

Embedded

Interfaces

Switches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB

Wireless

Non-DFS Frequencies

  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz


DFS Frequencies

  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz

RF Power

17 dBm EIRP

Encryption

AES-128

Range

Up to 500' / 152.4 m Line of Sight

Unicast Multicast

Unicast / Multicast

Noise Rejection

Can Coexist with Wi-Fi and 5 GHz Cordless Phones

Power Input

2-Pin Connector
7 to 17 VDC

Power Consumption

Nominal 7.3 W (Measured at 1080p60)

Operating Temperature

32 to 104°F / 0 to 40°C

Mountable

1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes

Dimensions

0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm

Weight

8 oz / 226 g

The Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features a 500' line-of-site transmission distance. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. 
The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, only HDMI supports 480p and 576p. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

Accessories

Canon LP-E6N Lithium-Ion Battery Pack (7.2V, 1865mAh)

$10 / 7 days

Canon LC-E6 Charger for LP-E6 Battery Pack

$33 / 7 days
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set Highlights

The Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features a 500' line-of-site transmission distance. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. 
The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, only HDMI supports 480p and 576p. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

User Manual
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set

Construction

Milled Aluminum Chassis and Regulation-Compliant PCB

Video Inputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle

Video Outputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through

Color Sampling

SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit

Latency

<0.001 Seconds (TX to RX without Format Conversion)

Supported Resolutions

1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50

Video Processing

Compression
Visually Lossless

Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color)

Audio Compression

48 kHz, 24-bit PCM

Audio Input

Embedded

Interfaces

Switches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB

Wireless

Non-DFS Frequencies

  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz


DFS Frequencies

  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz

RF Power

17 dBm EIRP

Encryption

AES-128

Range

Up to 500' / 152.4 m Line of Sight

Unicast Multicast

Unicast / Multicast

Noise Rejection

Can Coexist with Wi-Fi and 5 GHz Cordless Phones

Power Input

2-Pin Connector
7 to 17 VDC

Power Consumption

Nominal 7.3 W (Measured at 1080p60)

Operating Temperature

32 to 104°F / 0 to 40°C

Mountable

1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes

Dimensions

0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm

Weight

8 oz / 226 g

in the box

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter (TE5XT3GTX)
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver (TE5XT3GRX)
USB 3.0 Cable Type-A to Micro-B (USB3-MCRB)
AC Adapter

Q&A
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
in the box

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter (TE5XT3GTX)
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver (TE5XT3GRX)
USB 3.0 Cable Type-A to Micro-B (USB3-MCRB)
AC Adapter

User Manual

Construction

Milled Aluminum Chassis and Regulation-Compliant PCB

Video Inputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle

Video Outputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through

Color Sampling

SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit

Latency

<0.001 Seconds (TX to RX without Format Conversion)

Supported Resolutions

1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50

Video Processing

Compression
Visually Lossless

Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color)

Audio Compression

48 kHz, 24-bit PCM

Audio Input

Embedded

Interfaces

Switches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB

Wireless

Non-DFS Frequencies

  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz


DFS Frequencies

  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz

RF Power

17 dBm EIRP

Encryption

AES-128

Range

Up to 500' / 152.4 m Line of Sight

Unicast Multicast

Unicast / Multicast

Noise Rejection

Can Coexist with Wi-Fi and 5 GHz Cordless Phones

Power Input

2-Pin Connector
7 to 17 VDC

Power Consumption

Nominal 7.3 W (Measured at 1080p60)

Operating Temperature

32 to 104°F / 0 to 40°C

Mountable

1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes

Dimensions

0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm

Weight

8 oz / 226 g

The Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features a 500' line-of-site transmission distance. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. 
The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, only HDMI supports 480p and 576p. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

Accessories

Canon LP-E6N Lithium-Ion Battery Pack (7.2V, 1865mAh)

$10 / 7 days

Canon LC-E6 Charger for LP-E6 Battery Pack

$33 / 7 days
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set Highlights

The Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set includes one transmitter and one receiver. This enables you to immediately start transmitting up to 1080p60 video from either an SDI or HDMI source. The zero-latency transmitter/receiver pair features a 500' line-of-site transmission distance. You can send and receive visually lossless 3G-video signals from a Bolt 500 transmitter with zero latency. The transmitter features cross conversion, so you take an SDI signal in and loop out either an SDI or HDMI signal to your on-camera monitor. 
The receiver also features both SDI and HDMI outputs, and the system supports digital SD and HD signals. Although the inputs and outputs support a variety of HD signals in both 50 and 60 Hz standards, as well as 480i and 576i, only HDMI supports 480p and 576p. You can transmit up to three other 3rd-generation Bolt receivers as the transmitter can support up to four receivers. The built-in AES 128-bit encryption helps keep your transmitted video safe from prying eyes.

User Manual
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set

Construction

Milled Aluminum Chassis and Regulation-Compliant PCB

Video Inputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD
HDMI: 1 x HDMI Type A Receptacle

Video Outputs

SDI: 1 x BNC (75 Ohm), 3G/HD/SD, Loop-Through

Color Sampling

SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled)
HDMI: RGB 4:4:4, 8-Bit

Latency

<0.001 Seconds (TX to RX without Format Conversion)

Supported Resolutions

1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50

Video Processing

Compression
Visually Lossless

Color Correction
CDL/1024 1D LUT (Supports 10-Bit Color)
33x33x33 3D LUT (Supports 10-Bit Color)

Audio Compression

48 kHz, 24-bit PCM

Audio Input

Embedded

Interfaces

Switches: On/Off and Reset
Desktop App: Feature-Rich Bolt Manager Application for OS X and Windows
USB Interface Functionality: Upgrade via Mini-USB

Wireless

Non-DFS Frequencies

  • UA: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
  • EU & JP: 5.19 to 5.23 GHz


DFS Frequencies

  • US: 5.27 to 5.55 GHz and 5.67 GHz
  • EU & JP: 5.27 to 5.67 GHz

RF Power

17 dBm EIRP

Encryption

AES-128

Range

Up to 500' / 152.4 m Line of Sight

Unicast Multicast

Unicast / Multicast

Noise Rejection

Can Coexist with Wi-Fi and 5 GHz Cordless Phones

Power Input

2-Pin Connector
7 to 17 VDC

Power Consumption

Nominal 7.3 W (Measured at 1080p60)

Operating Temperature

32 to 104°F / 0 to 40°C

Mountable

1 x 1/4"-20 Threaded Mounting Hole
2 x M3 Threaded Mounting Holes

Dimensions

0.95 x 2.6 x 4.47" / 2.41 x 6.6 x 11.35 cm

Weight

8 oz / 226 g

in the box

Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter (TE5XT3GTX)
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Receiver (TE5XT3GRX)
USB 3.0 Cable Type-A to Micro-B (USB3-MCRB)
AC Adapter

Q&A
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
Recently Viewed
$180 / 7 days
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set
Rent now
Teradek Bolt 500 XT 3G-SDI/HDMI Wireless Transmitter and Receiver Set
Close

Contact Us

Hi - what may we help you with?

Please login to select previous order number

Thank You for Contacting Us

We'll email your ticket number within the next 15 minutes. If you do not receive an email within that time, please email support@example.com or call Customer Service at 866.766.6861 / 212.868.4476


Holiday Schedule

Please do not divulge private information (e.g., credit card number) via this form.

Thank You for Contacting Us

We'll email your ticket number within the next 15 minutes. If you do not receive an email within that time, please email support@example.com or call Customer Service at 866.766.6861 / 212.868.4476

HAVE A QUESTION?

CONTACT US

CUSTOMER SERVICE

778-872-0117

SALES & EXPERT ADVICE

CHAT WITH US