Recently Viewed
Oben ACM-2400 4-Section Aluminum Monopod
$8 / 7 days

Monopod Head

Camera Mounting Screw

1/4"-20 Male, 3/8"-16 Male


Leg

Leg Lock Type

Flip Lock

Leg Sections

4


General

Load Capacity

26.4 lb / 12 kg

Maximum Working Height

63.2" / 160 cm

Folded Length

21.3" / 53.3 cm

Materials

Aluminum Alloy

Weight

1.65 lb / 740 g

 

The Oben ACM-2400 4-Section Aluminum Monopod is a lightweight yet extremely sturdy one-legged support for a camera, whether point & shoot, DSLR, or video camera.

Light yet Sturdy

The ACM-2400 is composed of anodized aluminum to ensure its durability. It weighs only 1.65lb but is quite a robust piece of gear. It can comfortably support any of the super teles. It bears up to 26.5lb and can support just about any head, camera & lens combination that you want. Foam grip mitigates the effects of extreme temperatures and protects your camera by ensuring that your grip doesn't slip. Wrist strap features belt clip for convenient hands-free carrying. The monopod's chunky rubber foot conspires to keep your setup stable.

Extends to 63.2 Inches

The monopod extends to provide maximum height of 63.2inces which facilitates comfortable operation for most users and collapses to 21.3 inches.

 

Reversible 1/4"-20 & 3/8"-16 Mounting Screw

This mounting screw means it’s compatible with a wide variety of tripod heads. For fine control over camera orientation, attach a head to the monopod's reversible 3/8"-16 & 1/4"-20 mounting screw. Three set screws underneath the collar enable you to fasten the head securely to the plate. An Allen key is included & attached to the top leg section, so you're always ready to make adjustments.

Flip Locks

This four-section monopod uses sturdy flip locks rather than twist locks. The flip locks of the ACM-2400 are adjustable, which means you can use the included Allen key to tighten them if they expand and loosen slightly due to normal wear & tear. You can also adjust the action of the locks to suit your operating preference. Leg stages descend easily and lock into place securely, so setup is a breeze.

Travel Friendly

The monopod collapses to just 21.3", so you can stow it in many carry-on bags. No matter how near or far you roam, the ACM-2400 is a great travel companion: relatively lightweight and compact, very simple to operate – but steadfast and ready in an instant to help you capture the perfect shot.

Accessories

Oben ACM-2400 4-Section Aluminum Monopod Highlights

The Oben ACM-2400 4-Section Aluminum Monopod is a lightweight yet extremely sturdy one-legged support for a camera, whether point & shoot, DSLR, or video camera.

Light yet Sturdy

The ACM-2400 is composed of anodized aluminum to ensure its durability. It weighs only 1.65lb but is quite a robust piece of gear. It can comfortably support any of the super teles. It bears up to 26.5lb and can support just about any head, camera & lens combination that you want. Foam grip mitigates the effects of extreme temperatures and protects your camera by ensuring that your grip doesn't slip. Wrist strap features belt clip for convenient hands-free carrying. The monopod's chunky rubber foot conspires to keep your setup stable.

Extends to 63.2 Inches

The monopod extends to provide maximum height of 63.2inces which facilitates comfortable operation for most users and collapses to 21.3 inches.

 

Reversible 1/4"-20 & 3/8"-16 Mounting Screw

This mounting screw means it’s compatible with a wide variety of tripod heads. For fine control over camera orientation, attach a head to the monopod's reversible 3/8"-16 & 1/4"-20 mounting screw. Three set screws underneath the collar enable you to fasten the head securely to the plate. An Allen key is included & attached to the top leg section, so you're always ready to make adjustments.

Flip Locks

This four-section monopod uses sturdy flip locks rather than twist locks. The flip locks of the ACM-2400 are adjustable, which means you can use the included Allen key to tighten them if they expand and loosen slightly due to normal wear & tear. You can also adjust the action of the locks to suit your operating preference. Leg stages descend easily and lock into place securely, so setup is a breeze.

Travel Friendly

The monopod collapses to just 21.3", so you can stow it in many carry-on bags. No matter how near or far you roam, the ACM-2400 is a great travel companion: relatively lightweight and compact, very simple to operate – but steadfast and ready in an instant to help you capture the perfect shot.

User Manual
Oben ACM-2400 4-Section Aluminum Monopod

Monopod Head

Camera Mounting Screw

1/4"-20 Male, 3/8"-16 Male


Leg

Leg Lock Type

Flip Lock

Leg Sections

4


General

Load Capacity

26.4 lb / 12 kg

Maximum Working Height

63.2" / 160 cm

Folded Length

21.3" / 53.3 cm

Materials

Aluminum Alloy

Weight

1.65 lb / 740 g

 

in the box

Oben ACM-2400 4-Section Aluminum Monopod (OBACM2400)
Allen Key
Dust Bag

 
Q&A
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
in the box

Oben ACM-2400 4-Section Aluminum Monopod (OBACM2400)
Allen Key
Dust Bag

 
User Manual

Monopod Head

Camera Mounting Screw

1/4"-20 Male, 3/8"-16 Male


Leg

Leg Lock Type

Flip Lock

Leg Sections

4


General

Load Capacity

26.4 lb / 12 kg

Maximum Working Height

63.2" / 160 cm

Folded Length

21.3" / 53.3 cm

Materials

Aluminum Alloy

Weight

1.65 lb / 740 g

 

The Oben ACM-2400 4-Section Aluminum Monopod is a lightweight yet extremely sturdy one-legged support for a camera, whether point & shoot, DSLR, or video camera.

Light yet Sturdy

The ACM-2400 is composed of anodized aluminum to ensure its durability. It weighs only 1.65lb but is quite a robust piece of gear. It can comfortably support any of the super teles. It bears up to 26.5lb and can support just about any head, camera & lens combination that you want. Foam grip mitigates the effects of extreme temperatures and protects your camera by ensuring that your grip doesn't slip. Wrist strap features belt clip for convenient hands-free carrying. The monopod's chunky rubber foot conspires to keep your setup stable.

Extends to 63.2 Inches

The monopod extends to provide maximum height of 63.2inces which facilitates comfortable operation for most users and collapses to 21.3 inches.

 

Reversible 1/4"-20 & 3/8"-16 Mounting Screw

This mounting screw means it’s compatible with a wide variety of tripod heads. For fine control over camera orientation, attach a head to the monopod's reversible 3/8"-16 & 1/4"-20 mounting screw. Three set screws underneath the collar enable you to fasten the head securely to the plate. An Allen key is included & attached to the top leg section, so you're always ready to make adjustments.

Flip Locks

This four-section monopod uses sturdy flip locks rather than twist locks. The flip locks of the ACM-2400 are adjustable, which means you can use the included Allen key to tighten them if they expand and loosen slightly due to normal wear & tear. You can also adjust the action of the locks to suit your operating preference. Leg stages descend easily and lock into place securely, so setup is a breeze.

Travel Friendly

The monopod collapses to just 21.3", so you can stow it in many carry-on bags. No matter how near or far you roam, the ACM-2400 is a great travel companion: relatively lightweight and compact, very simple to operate – but steadfast and ready in an instant to help you capture the perfect shot.

Accessories

Oben ACM-2400 4-Section Aluminum Monopod Highlights

The Oben ACM-2400 4-Section Aluminum Monopod is a lightweight yet extremely sturdy one-legged support for a camera, whether point & shoot, DSLR, or video camera.

Light yet Sturdy

The ACM-2400 is composed of anodized aluminum to ensure its durability. It weighs only 1.65lb but is quite a robust piece of gear. It can comfortably support any of the super teles. It bears up to 26.5lb and can support just about any head, camera & lens combination that you want. Foam grip mitigates the effects of extreme temperatures and protects your camera by ensuring that your grip doesn't slip. Wrist strap features belt clip for convenient hands-free carrying. The monopod's chunky rubber foot conspires to keep your setup stable.

Extends to 63.2 Inches

The monopod extends to provide maximum height of 63.2inces which facilitates comfortable operation for most users and collapses to 21.3 inches.

 

Reversible 1/4"-20 & 3/8"-16 Mounting Screw

This mounting screw means it’s compatible with a wide variety of tripod heads. For fine control over camera orientation, attach a head to the monopod's reversible 3/8"-16 & 1/4"-20 mounting screw. Three set screws underneath the collar enable you to fasten the head securely to the plate. An Allen key is included & attached to the top leg section, so you're always ready to make adjustments.

Flip Locks

This four-section monopod uses sturdy flip locks rather than twist locks. The flip locks of the ACM-2400 are adjustable, which means you can use the included Allen key to tighten them if they expand and loosen slightly due to normal wear & tear. You can also adjust the action of the locks to suit your operating preference. Leg stages descend easily and lock into place securely, so setup is a breeze.

Travel Friendly

The monopod collapses to just 21.3", so you can stow it in many carry-on bags. No matter how near or far you roam, the ACM-2400 is a great travel companion: relatively lightweight and compact, very simple to operate – but steadfast and ready in an instant to help you capture the perfect shot.

User Manual
Oben ACM-2400 4-Section Aluminum Monopod

Monopod Head

Camera Mounting Screw

1/4"-20 Male, 3/8"-16 Male


Leg

Leg Lock Type

Flip Lock

Leg Sections

4


General

Load Capacity

26.4 lb / 12 kg

Maximum Working Height

63.2" / 160 cm

Folded Length

21.3" / 53.3 cm

Materials

Aluminum Alloy

Weight

1.65 lb / 740 g

 

in the box

Oben ACM-2400 4-Section Aluminum Monopod (OBACM2400)
Allen Key
Dust Bag

 
Q&A
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
Recently Viewed
$8 / 7 days
Oben ACM-2400 4-Section Aluminum Monopod
Rent now
Oben ACM-2400 4-Section Aluminum Monopod
Close

Contact Us

Hi - what may we help you with?

Please login to select previous order number

Thank You for Contacting Us

We'll email your ticket number within the next 15 minutes. If you do not receive an email within that time, please email support@example.com or call Customer Service at 866.766.6861 / 212.868.4476


Holiday Schedule

Please do not divulge private information (e.g., credit card number) via this form.

Thank You for Contacting Us

We'll email your ticket number within the next 15 minutes. If you do not receive an email within that time, please email support@example.com or call Customer Service at 866.766.6861 / 212.868.4476

HAVE A QUESTION?

CONTACT US

CUSTOMER SERVICE

778-872-0117

SALES & EXPERT ADVICE

CHAT WITH US