Front Lens Diameter |
Fits: 3.9-4.1" (100-105 mm) |
Type |
Clamp-on |
Filter Type |
4 x 5.65" (101.6 x 143.5 mm) |
Total Filter Stages |
2 |
Materials |
Rubber, stainless steel |
Dimensions (WxHxD) |
6.75 x 5 x 1.5" (17.15 x 12.7 x 3.81 cm) |
Weight |
4.8 oz (136 g) |
The 2-Stage Clamp-On Zip Box (100-105mm) from Wooden Camera is a lightweight matte box/sunshade. It holds up to two 4 x 5.65" filters and will fit lenses with a front diameter of 100-105mm. Flex the rubber body to snugly fit around the filter(s), then tighten the thumbscrew to clamp the Zip Box onto the lens.
Durable
Stainless steel components and unibody rubber design are very durable and stand up to the toughest conditions.
Lightweight
The Zip Box is an extremely lightweight, flexible rubber matte box alternative. This makes it perfect for gimbal and drone use work while keeping your rig compact.
Wide-Angle Compatibility
The lens shade design allows for even the widest lenses and sensor sizes to be covered without vignetting.
Simple Installation
To install the Zip Box, simply flex its rubber body to snugly fit around the filter(s), then tighten the thumbscrew to clamp it onto the lens.
Please Note:
- In order to ensure compatibility, you should measure the outside lens diameter and not the threaded filter ring size.
- Compatible Lenses:
Not a comprehensive list, check your lens diameter for compatibility:
Schneider-Kreuznach Cine-Xenar III 18mm/T2.2, 25mm/T2.2, 35mm/T2.1, 50mm/T2.0, 75mm/T2.0, 95mmT2.0
ARRI LDS Ultra Prime 12mm/T2.0, 14/16/20/24/28/32/40/50/65/85/100/135/180mm T1.9
Accessories
Front Lens Diameter |
Fits: 3.9-4.1" (100-105 mm) |
Type |
Clamp-on |
Filter Type |
4 x 5.65" (101.6 x 143.5 mm) |
Total Filter Stages |
2 |
Materials |
Rubber, stainless steel |
Dimensions (WxHxD) |
6.75 x 5 x 1.5" (17.15 x 12.7 x 3.81 cm) |
Weight |
4.8 oz (136 g) |
Wooden Camera 2-Stage Clamp-On 4 x 5.65" Zip Box (100-105mm) (WO241800)
Front Lens Diameter |
Fits: 3.9-4.1" (100-105 mm) |
Type |
Clamp-on |
Filter Type |
4 x 5.65" (101.6 x 143.5 mm) |
Total Filter Stages |
2 |
Materials |
Rubber, stainless steel |
Dimensions (WxHxD) |
6.75 x 5 x 1.5" (17.15 x 12.7 x 3.81 cm) |
Weight |
4.8 oz (136 g) |
The 2-Stage Clamp-On Zip Box (100-105mm) from Wooden Camera is a lightweight matte box/sunshade. It holds up to two 4 x 5.65" filters and will fit lenses with a front diameter of 100-105mm. Flex the rubber body to snugly fit around the filter(s), then tighten the thumbscrew to clamp the Zip Box onto the lens.
Durable
Stainless steel components and unibody rubber design are very durable and stand up to the toughest conditions.
Lightweight
The Zip Box is an extremely lightweight, flexible rubber matte box alternative. This makes it perfect for gimbal and drone use work while keeping your rig compact.
Wide-Angle Compatibility
The lens shade design allows for even the widest lenses and sensor sizes to be covered without vignetting.
Simple Installation
To install the Zip Box, simply flex its rubber body to snugly fit around the filter(s), then tighten the thumbscrew to clamp it onto the lens.
Please Note:
- In order to ensure compatibility, you should measure the outside lens diameter and not the threaded filter ring size.
- Compatible Lenses:
Not a comprehensive list, check your lens diameter for compatibility:
Schneider-Kreuznach Cine-Xenar III 18mm/T2.2, 25mm/T2.2, 35mm/T2.1, 50mm/T2.0, 75mm/T2.0, 95mmT2.0
ARRI LDS Ultra Prime 12mm/T2.0, 14/16/20/24/28/32/40/50/65/85/100/135/180mm T1.9
Accessories
Front Lens Diameter |
Fits: 3.9-4.1" (100-105 mm) |
Type |
Clamp-on |
Filter Type |
4 x 5.65" (101.6 x 143.5 mm) |
Total Filter Stages |
2 |
Materials |
Rubber, stainless steel |
Dimensions (WxHxD) |
6.75 x 5 x 1.5" (17.15 x 12.7 x 3.81 cm) |
Weight |
4.8 oz (136 g) |

Contact Us
Hi - what may we help you with?
Thank You for Contacting Us
We'll email your ticket number within the next 15 minutes. If you do not receive an email within that time, please email support@example.com or call Customer Service at 866.766.6861 / 212.868.4476