Recently Viewed
Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones
$36 / 7 days

Compatible Mic Diameter

0.748 to 0.87" / 19 to 22 mm

Inner Depth

5" / 12.7 cm

Outer Diameter

5" / 125 mm

Length

19.3" / 490 mm

Weight

1.2 lb / 550 g

Inputs

1 x 3-Pin XLR Female

Outputs

1 x 3-Pin XLR Male

Mounting Thread

3/8"-16 Female

The Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones is designed to provide your shotgun microphone with protection from wind noise and isolation from shock and vibration. It fits the Rode NTG1, NTG2, NTG3, NTG4 and NTG4+ and any shotgun mic up to 12.75" in length.

Protection from Wind & Shock

The Rode Blimp Windshield and Rycote Shock Mount Suspension System is the ultimate wind and shock absorber for RODE shotgun microphones. The Rycote shock absorber provides more vibration reduction than traditional elastic suspension and without the possibility of loose, sagging band. If an additional layer of wind protection is needed the included dead wombat windscreen will cut it down even further.

Other Features

The lightweight design make boom operation less physically taxing. There’s also 3/8"-16 thread attachment on the bottom of the handle to facilitate boom pole attachment. Housed inside the grip is a Mogami microphone cable which splits via a junction box to a flexible thin cable inside the Blimp, to minimize the transference of vibration to the microphone.

Accommodates Shotgun Mics up to 12.75”

This wind shield shock absorber works perfectly with NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, but can also fit most shotgun mics that come in under 12.75" in length.

Accessories

Rode NTG2 Shotgun Microphone

$31 / 7 days

Rode NTG4+ Shotgun Microphone

$40 / 7 days

Sennheiser MKH 416-P48 Short Shotgun Interference Tube Mic

$165 / 7 days

Zoom H4n Pro 4-Input / 4-Track Portable Handy Recorder

$33 / 7 days
Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones Highlights

The Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones is designed to provide your shotgun microphone with protection from wind noise and isolation from shock and vibration. It fits the Rode NTG1, NTG2, NTG3, NTG4 and NTG4+ and any shotgun mic up to 12.75" in length.

Protection from Wind & Shock

The Rode Blimp Windshield and Rycote Shock Mount Suspension System is the ultimate wind and shock absorber for RODE shotgun microphones. The Rycote shock absorber provides more vibration reduction than traditional elastic suspension and without the possibility of loose, sagging band. If an additional layer of wind protection is needed the included dead wombat windscreen will cut it down even further.

Other Features

The lightweight design make boom operation less physically taxing. There’s also 3/8"-16 thread attachment on the bottom of the handle to facilitate boom pole attachment. Housed inside the grip is a Mogami microphone cable which splits via a junction box to a flexible thin cable inside the Blimp, to minimize the transference of vibration to the microphone.

Accommodates Shotgun Mics up to 12.75”

This wind shield shock absorber works perfectly with NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, but can also fit most shotgun mics that come in under 12.75" in length.

User Manual
Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones

Compatible Mic Diameter

0.748 to 0.87" / 19 to 22 mm

Inner Depth

5" / 12.7 cm

Outer Diameter

5" / 125 mm

Length

19.3" / 490 mm

Weight

1.2 lb / 550 g

Inputs

1 x 3-Pin XLR Female

Outputs

1 x 3-Pin XLR Male

Mounting Thread

3/8"-16 Female

in the box

Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones   (ROBLIMPR)
Dead Wombat Windshield
Tail/Patch Cable
Caring Brush
Nanuk 925 Case with Foam (NA9251001)

Q&A
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
in the box

Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones   (ROBLIMPR)
Dead Wombat Windshield
Tail/Patch Cable
Caring Brush
Nanuk 925 Case with Foam (NA9251001)

User Manual

Compatible Mic Diameter

0.748 to 0.87" / 19 to 22 mm

Inner Depth

5" / 12.7 cm

Outer Diameter

5" / 125 mm

Length

19.3" / 490 mm

Weight

1.2 lb / 550 g

Inputs

1 x 3-Pin XLR Female

Outputs

1 x 3-Pin XLR Male

Mounting Thread

3/8"-16 Female

The Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones is designed to provide your shotgun microphone with protection from wind noise and isolation from shock and vibration. It fits the Rode NTG1, NTG2, NTG3, NTG4 and NTG4+ and any shotgun mic up to 12.75" in length.

Protection from Wind & Shock

The Rode Blimp Windshield and Rycote Shock Mount Suspension System is the ultimate wind and shock absorber for RODE shotgun microphones. The Rycote shock absorber provides more vibration reduction than traditional elastic suspension and without the possibility of loose, sagging band. If an additional layer of wind protection is needed the included dead wombat windscreen will cut it down even further.

Other Features

The lightweight design make boom operation less physically taxing. There’s also 3/8"-16 thread attachment on the bottom of the handle to facilitate boom pole attachment. Housed inside the grip is a Mogami microphone cable which splits via a junction box to a flexible thin cable inside the Blimp, to minimize the transference of vibration to the microphone.

Accommodates Shotgun Mics up to 12.75”

This wind shield shock absorber works perfectly with NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, but can also fit most shotgun mics that come in under 12.75" in length.

Accessories

Rode NTG2 Shotgun Microphone

$31 / 7 days

Rode NTG4+ Shotgun Microphone

$40 / 7 days

Sennheiser MKH 416-P48 Short Shotgun Interference Tube Mic

$165 / 7 days

Zoom H4n Pro 4-Input / 4-Track Portable Handy Recorder

$33 / 7 days
Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones Highlights

The Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones is designed to provide your shotgun microphone with protection from wind noise and isolation from shock and vibration. It fits the Rode NTG1, NTG2, NTG3, NTG4 and NTG4+ and any shotgun mic up to 12.75" in length.

Protection from Wind & Shock

The Rode Blimp Windshield and Rycote Shock Mount Suspension System is the ultimate wind and shock absorber for RODE shotgun microphones. The Rycote shock absorber provides more vibration reduction than traditional elastic suspension and without the possibility of loose, sagging band. If an additional layer of wind protection is needed the included dead wombat windscreen will cut it down even further.

Other Features

The lightweight design make boom operation less physically taxing. There’s also 3/8"-16 thread attachment on the bottom of the handle to facilitate boom pole attachment. Housed inside the grip is a Mogami microphone cable which splits via a junction box to a flexible thin cable inside the Blimp, to minimize the transference of vibration to the microphone.

Accommodates Shotgun Mics up to 12.75”

This wind shield shock absorber works perfectly with NTG1, NTG2, NTG3, NTG4 and NTG4+ microphones, but can also fit most shotgun mics that come in under 12.75" in length.

User Manual
Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones

Compatible Mic Diameter

0.748 to 0.87" / 19 to 22 mm

Inner Depth

5" / 12.7 cm

Outer Diameter

5" / 125 mm

Length

19.3" / 490 mm

Weight

1.2 lb / 550 g

Inputs

1 x 3-Pin XLR Female

Outputs

1 x 3-Pin XLR Male

Mounting Thread

3/8"-16 Female

in the box

Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones   (ROBLIMPR)
Dead Wombat Windshield
Tail/Patch Cable
Caring Brush
Nanuk 925 Case with Foam (NA9251001)

Q&A
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
In the Specs, only one aspect ratio is listed (3:2). The 5DS and 5DSR offer four aspect ratios (1:1, 3:2, 4:3, 16:9). Does the 5D Mark IV only offer one aspect ratio?
Zlatko on Aug 24, 2016
BEST ANSWER:
Yes
Ioan on Jul 22, 2019
Recently Viewed
$36 / 7 days
Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones
Rent now
Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones
Close

Contact Us

Hi - what may we help you with?

Please login to select previous order number

Thank You for Contacting Us

We'll email your ticket number within the next 15 minutes. If you do not receive an email within that time, please email support@example.com or call Customer Service at 866.766.6861 / 212.868.4476


Holiday Schedule

Please do not divulge private information (e.g., credit card number) via this form.

Thank You for Contacting Us

We'll email your ticket number within the next 15 minutes. If you do not receive an email within that time, please email support@example.com or call Customer Service at 866.766.6861 / 212.868.4476

HAVE A QUESTION?

CONTACT US

CUSTOMER SERVICE

778-872-0117

SALES & EXPERT ADVICE

CHAT WITH US